Product Description
This Product is a high-power centralized power conversion system,which enables AC/DC conversion between the grid and the battery,realizes bidirectional energy flow between the above two,and serves as the main actuator and core component of the power storage system.It can be applied to various scenarios,such as supporting energy storage on the side of new energy generation,alleviating wind and light power and other new energy grid connections,AGC auxiliary frequency regulation of traditional generator sets,smoothing load fluctuation,peak regulation and frequency regulation on the power grid side,solving the power/energy gap,industrial and commercial energy storage on the user side,peak load shaving,dynamic capacity expansion;improving the power reliability of micro grids and isolated networks,and providing sustainable clean energy.
Product Model
INPPCS-1250/0.69-OD
INPPCS-1500/0.69-OD
INPPCS-1725/0.69-OD
Certifications
The Power Energy Storage Converter Module (Power Conversion System- INPPCS) meets the following standard:
IEC-62477 |
Safety requirements for power electronic conversion systems and equipment |
IEC-61000 |
Electromagnetic Compatibility (EMC) |
Product Features of 1500VDC Outdoor Energy Storage Converter (Power Conversion System- INPPCS) :
1) Featuring PQ,VF,VSG mode online switching function,HV/LV ride-through function. |
2) Fast power scheduling response,with PCS power response time <20ms. |
3) Three-level design with maximum efficiency of up to 99%. |
4) Maximum voltage of 1500V, greater power density, smaller floor space. |
5) Higher protection of IP55 enables direct outdoor applications. |
6) Wide DC operating voltage range for multiple battery types up to 1500V full load operation. |
7) It has the functions of frequency modulation and voltage regulation,supports the grid-disconnected "black start"function,and effectively supports the power grid. |
8) Support multi-machine parallel connections with good scalability. |
Technical Parameters of 1500VDC Outdoor Energy Storage Converter (Power Conversion System- INPPCS) :
Product model |
INP PCS-1250/0.69-OD |
INP PCS-1500/0.69-OD |
INPPCS-1725/0.69-OD |
DC side parameters |
|
Maximum DC voltage |
1500V |
DC voltage range |
1000-1500V |
Maximum DC current |
1310A |
1571A |
1808A |
Grid connection parameters at AC side |
|
Rated output power |
1250kW |
1500kW |
1725kW |
Maximum output power |
1375kW |
1650kW |
1898kW |
Rated voltage |
690V |
Maximum AC current |
1151A |
1380A |
1588A |
Rated frequency |
50Hz/60Hz |
Frequency range |
45-55Hz/55-65Hz |
Total Current Distortion (THD) |
<3%(Rated output power) |
DC component |
≤0.5%In |
Power factor |
>0.99 |
Adjustable range of power factor |
-1~1adjustable |
Wiring mode |
3+PE |
AC side grid-disconnected parameters |
|
Rated output power |
1250kW |
1500kW |
1725kW |
Maximum output power |
1375kW |
1650kW |
1898kW |
Voltage distortion rate |
<3%(no load or linear load)) |
Voltage range |
690V±3% |
General parameters |
|
Maximum efficiency |
>99% |
Charge and discharge conversion time |
<20ms |
Operating ambient temperature |
-30~60ºC(derating at>45ºC) |
Altitude |
4000m(capacity reduction above 2000m) |
Relative humidity range |
0-95%((no condensation) |
Ingress Protection |
IP55 |
Cooling method |
Intelligent air cooling |
Dimension (W*D*H) |
1130mm*1400mm*2350mm |
Weight |
<1.65T |
Battery communication interface |
CAN/RS485 |
Dispatching communication interface |
Ethernet |
Communication protocol |
Standard: Modbus RTU/Modbus TCP/IEC104/CAN2.0 B,optional IEC61850 |
Meet the standard |
GB/T34120,GB/T34133 |
Product Principle of The Centralized Energy Storage Converter (Power Conversion System- INPPCS) :
Other products:
Exterior view of the The Power Energy Storage Converter Module (Power Conversion System- INPPCS):
Series B
|
Series C
|
Converter application scenario: