Product Description
- 100KWPCS (Series B):The 100kw series B is divided into two models, namely, the three-leg four-wire and the four-leg four-wire. Among them, the three-leg four-wire products are applicable for 215kWh battery clusters, offering excellent cost-effectiveness. Four-leg four-wire products are applicable for 200kWh/215kWh battery clusters, offering pure single-phase load capacity.
- 100kWPCS (Series C):The 100kw series B product adopts the four-leg design, applicable for 215kWh and 233kWh battery clusters. The direct voltage is up to 950V, exhibiting superior performance. Simultaneously possesses CE certification and certifications for grid connection in multiple countries.
Product Model
For example:
1. INPPCS-100/0.4-W-X4-B2
2. INPPCS-100/0.4-W-X4-C1
3. INPPCS-100/0.4-W-25-B2
Certifications
The Power Energy Storage Converter Module (Power Conversion System- INPPCS) meets the following standard:
| IEC-62477 |
Safety requirements for power electronic conversion systems and equipment |
| IEC-61000 |
Electromagnetic Compatibility (EMC) |
Product Features of The Power Energy Storage Converter Module (Power Conversion System- INPPCS) :
| 1) A three-phase four-wire design features both single-phase and three-phase active and reactive power control functions,while the four-leg product offers pure single-phaseload capability. |
| 2) 100%three-phase unbalanced load capacity, perfectly applicable for transformer stations / commercial applica tions / microgrids, and other operating conditions |
| 3) The drawer type and side type are compatible,with options for front wiring and rear wiring,making the instal- lation modes more flexible. |
| 4) The AC side can accom- modate 20 units directly connected in parallel (in grid-connected mode). |
| 5) Supports seamless switch- ing between grid-connect- ed and off-grid modes, with a switching time of< 20ms. |
| 6) Featuring PQ, VF, VST, black-start, and other fuctions. |
Technical Parameters of The 100KW Power Energy Storage Converter Module (Power Conversion System- INPPCS) :
| Product mode |
INP PCS 100/0.4-W-25-B2 |
INP PCS 100/0.4-W-X4-B2 |
INP PCS 100/0.4-W-X4-C1 |
| DC side parameters |
|
| DC voltage range |
680-900V |
600-900V |
600-950V |
| Rated powel |
100kW |
| DC maximum current |
176A |
190A |
192A |
| AC side parameters(grid-connect |
ed) |
| Rated power |
100kW |
| Rated voltage |
400V |
| Allowable grid voltage range |
400V(-20%~+15%) |
| Rated current |
145A |
| Output frequency |
50/60Hz±2.5Hz |
| Wiring mode |
Three-legfour-wire |
Three-phase four-leg |
| DC current component |
≤0.50% |
| Power factor |
-0.99~+0.99 |
| AC side parameters (grid-disconn |
ected) |
| ACgrid-disconnected voltage |
400V |
| Output frequency |
50Hz/60Hz |
| Grid-disconnected output THDU |
≤5%(linear load) |
≤3%(linear load) |
| Unbalanced load capacity |
100% |
| Overload capacity |
1.1 times forlong-term,1.2 times for lmin |
| Communicationmode |
|
| Display |
None |
| Communication interface |
Ethernet port,CAN,RS485 |
| Protection |
Overtemperature,input and output overvoltage and undervoltage,reverse
polarity protection,output overcurrent,etc. |
| General parameters |
|
| Maximum efficiency |
≥98% |
| Operating temperature range |
-20ºC~50ºC(derating at 45ºCand above) |
| Ingress Protection |
IP20 |
| Altitude |
3000m(>2000m derated) |
| Relative humidity |
≤95% |
| Dimension (W*D*H) |
480mm*620mm*186mm |
480mm*720mm*260mm |
| Weight |
50kg |
50kg |
70kg |
The topology of the The Power Energy Storage Converter Module (Power Conversion System- INPPCS):
Exterior view of the The Power Energy Storage Converter Module (Power Conversion System- INPPCS):
Series B
|
Series C
|
For example: 
){kind=link}