Customization: | Available |
---|---|
Certification: | ISO9001, CCC, CE UL |
Protection: | Shock Resistance |
Still deciding? Get samples of US$ 5000/SET
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
This 125KW Energy Storage Converter is a dedicated PCS specifically designed for industrial and commercial use with 314Ah large battery cells, supporting an ultra-wide DC voltage range of 600-1000V, and perfectly compatible with 48S and 52S liquid cooling battery clusters.At the same time, SIC power devices are used,with an efficiency of over 99%, and our characteristic three-phase four-leg design is retained, making it capable of handling 100%unbalanced loads.
IEC-62477 | Safety requirements for power electronic conversion systems and equipment |
IEC-61000 | Electromagnetic Compatibility (EMC) |
1) Supports a wider DC voltage range of 600-1000V and is compat- ible with different battery system configurations. |
2) SIC devices are adopted as power components,offering higheroverall efficiency and reduced product oss compared to traditional IGBT devices, thereby enhancing project profitability for indus- trial and commercial users. |
3) Three-phase four-leg technology features and the hardware architecture maintain the distinctive characteristics of INP Electric |
4) Boasting high efficiency,the product achieves a full load efficiency of at least 98% and a maximum efficiency of 99%. |
5) The design standard meets CE certification standards, with the main components selected according to specific configurations for domestic and overseas markets.Additionally,the overseas version has grid-disconnected parallel capability. |
6) Complying with the requirements of GB42288, it has both AC and DC disconnection capabilities. Both positive and negative DC circuits incorporate contactors and fuses, adapting to the market trend of minimizing the need for high-voltage boxes. |
Product mode | INPPCS-125/0.4-W-14-A1 |
DC side parameters | |
DC voltage range | DC600V~1000V |
Rated DC current | 198A |
Rated DC power | 125kW |
AC grid-connected parameters | |
Rated power | 125kW |
Rated voltage | 4AC00V |
Rated AC current | 180A |
AC access mode | Three-phase four-wire |
Grid voltage range | 400V(-15%~+15%) |
Grid frequency range | 50Hz/60Hz±2.5Hz |
Total harmonic distortion rate of current | ≤5%(full load) |
Power factor | 0.99/-1~1 |
Current DC component | ≤0.5% |
AC grid-disconnected parameters | |
ACgrid-disconnected voltage | AC400V |
AC direct voltage range | AC400V±3% |
AC grid-disconnected frequency | 50Hz/60Hz |
Grid-disconnected output THDU | ≤3%(linear load) |
Unbalancedload capacity | 100% |
Other Parameters | |
Maximum conversion efficiency | ≤99%,full load≥98% |
Allowable ambienttemperature | -30ºC~65ºC(≥50ºCloading limit) |
Allowable relative humidity | ≤95% |
Noise | ≤75dB |
Protection | IP20 |
Altitude | 3000m |
Dimension | W520mm×H186mm×D680mm |
Weight | <65kg |
Cooling method | Forced aircooling |
Wiring and direction ofairoutlet | The primary and secondary modulations are located in the front, with front airinlet andrear air outlet. |
BMS communication interface | CANor RS485 |
EMS communication interface | Ethernet port or RS485 |
|
Series B |
Series C
|