Products Description:
Wall-Mounted Commercial Purpose Fully Premixed Condensing Gas-Fired Heating Furnace:
|
Power model: 28kW, 60kW, 80kW, 99kW, 120kW;
High efficiency and energy saving: efficiency up to 108%;
Cascade control: can meet all kinds of complex hydraulic system forms;
Low nitrogen environmental protection: NOx emission as low as 30mg/m³ (standard working condition);
Material: cast silicon aluminum host heat exchanger, high efficiency, strong corrosion-resistance;
Stable operation: the use of advanced imported accessories to ensure safe and reliable operation;
Intelligent comfort: unattended, accurate temperature control, make heating more comfortable;
Easy installation: prefabricated cascade hydraulic module and bracket, can realize on-site assembly type installation;
Long service life: The design life of core components such as cast Si-Al heat exchangers is more than 20 years. |
TechnicalData |
Unit |
ProductModel&Specification |
GARC-LB28 |
GARC-LB60 |
GARC-LB80 |
GARC-LB99 |
GARC-LB120 |
Rated heat output |
kW |
28 |
60 |
80 |
99 |
120 |
Max. gas consumption at rated thermal power |
m3/h |
2.8 |
6 |
8 |
9.9 |
12 |
Hotwater supply capability(△t=20°C) |
m3/h |
1.2 |
2.6 |
3.5 |
4.3 |
5.2 |
Max.water flow |
m3/h |
2.4 |
5.2 |
7 |
8.6 |
10.4 |
Mini./max.water system pressure |
bar |
0.2/3 |
0.2/3 |
0.2/3 |
0.2/3 |
0.2/3 |
Max.outlet water temperature |
ºC |
90 |
90 |
90 |
90 |
90 |
Thermal efficiency at max. load of 80°C~60°C |
% |
96 |
96 |
96 |
96 |
96 |
Thermal efficiency at max. load of 50°C~30°C |
% |
103 |
103 |
103 |
103 |
103 |
Thermal efficiency at 30% load (outle twater temperature is 30°C) |
% |
108 |
108 |
108 |
108 |
108 |
CO emissions |
ppm |
<40 |
<40 |
<40 |
<40 |
<40 |
CO emissions |
mg/m3 |
<30 |
<30 |
<30 |
<30 |
<30 |
Type of gas supply |
/ |
12T |
12T |
12T |
12T |
12T |
Gas pressure (dynamic pressure) |
kPa |
2~5 |
2~5 |
2~5 |
2~5 |
2~5 |
Size of gas interface |
/ |
DN20 |
DN25 |
DN25 |
DN25 |
DN25 |
Size of outlet water interface |
/ |
DN25 |
DN32 |
DN32 |
DN32 |
DN32 |
Sizeofreturnwaterinterface |
/ |
DN25 |
DN32 |
DN32 |
DN32 |
DN32 |
Size of condensate outlet interface |
/ |
DN15 |
DN15 |
DN15 |
DN15 |
DN15 |
Diameter. of smoke outlet |
mm |
70 |
110 |
110 |
110 |
110 |
Dimensions of the wall-mounted gas-fired furnace |
L |
mm |
450 |
560 |
560 |
560 |
560 |
W |
mm |
380 |
470 |
470 |
470 |
470 |
H |
mm |
716 |
845 |
845 |
845 |
845 |
Premixed Combustion Technology:
Pre-premixing technology refers to the premixing of gas and excess air in front of the fan. The premixed air enters the combustion chamber through the wind. The gas servo proportional valve and automatic premix control technology make the gas mix fully proportioned with air in front of the fan. By adjusting the gas proportional valve, gas combustion with high efficiency and low discharge can be realized. A metal fiber burner is used to make premixed gas burn evenly on its surface. Local high temperature is avoided, nitrogen oxide emissions are reduced, and radiation heat transfer is realized.
Технология предварительного смешивания относится к предварительному смешиванию газа и избыточного воздуха перед вентилятором. Предварительно смешанный воздух поступает в камеру сгорания с помощью ветра. Пропорциональный газовый сервоклапан и технология автоматического управления предварительным смешиванием полностью смешивают газовую смесь с воздухом перед вентилятором. Регулируя газовый пропорциональный клапан, можно реализовать сжигание газа с высокой эффективностью и низким расходом. Горелка с металлическим волокном используется для равномерного горения предварительно перемешанного газа на его поверхности. Избегается локальная высокая температура, сокращаются выбросы оксидов азота и реализуется радиационный теплообмен.
Condensing Heat Transfer Technology:
The material of the main heat exchanger, the core part of the full premix low nitrogen condensing gas boiler, is cast silicon aluminum. The main heat exchanger integrates the combustion chamber, flue, and waterway. The cast aluminum heat exchanger has good corrosion resistance. The columnar endothermic column has the largest heat exchange area in a limited volume. The combustion chamber and the export are located above the main heat exchanger. The water inlet is at the bottom. The water temperature increases gradually from bottom to top. The flue gas from top to bottom temperature is gradually diminishing. In order to ensure that each point in the heat exchanger can be adequately heated, water and flue gas flow in reverse place. In that way, the most explicit in flue gas heat and water vapor latent heat is absorbed by the water, the exhaust temperature is reduced effectively, and water vapor is precipitated from the flue gas. This technology can achieve efficiency, energy-saving, and environmental protection authentically.
Материал основного теплообменника, основной части конденсационного газового котла с полным предварительным смешиванием и низким содержанием азота, представляет собой литой кремнистый алюминий. Главный теплообменник объединяет камеру сгорания, дымоход и водовод. Литой алюминиевый теплообменник обладает хорошей коррозионной стойкостью. Столбчатая эндотермическая колонна имеет наибольшую площадь теплообмена в ограниченном объеме. Камера сгорания и вывоз расположены над основным теплообменником. Вход воды находится внизу. Температура воды постепенно повышается снизу вверх. Температура дымовых газов сверху вниз постепенно снижается. Для обеспечения достаточного нагрева каждой точки теплообменника вода и дымовые газы идут в обратном направлении. Таким образом, наиболее явная теплота дымовых газов и скрытая теплота водяного пара поглощаются водой, температура выхлопных газов эффективно снижается, а водяной пар осаждается из дымовых газов. Эта технология может обеспечить эффективность, энергосбережение и защиту окружающей среды.
Product Advantages:
High Effiiciency |
Energy-Saving |
Evironmental Protection |
Safty |
Reliable |
Low Exhaust Temperature |
Intelligent |
Long Service Life |
Wide Temperature Range |
Silent Operation |
Wide Adaptability |
Personlized Design |
Small Occupation Area |
Worry-free Use |
Performance Comparison |
Convential Gas-Fired Boiler |
Fully Premixed Low Nitrogen Condensing Gas-Fired Boiler |
Thermal Efficiency |
90% |
108% |
NOx Emission |
2 levels, basic level |
5 levels, the cleanest level |
Heating-Load Turndown Tation |
gear/step adjustment |
15%~100 stepless adjustment on demand |
Average Gas Consumption per Square Meter in a Heating Season(4months, in North China) |
8-10m3 |
5-6m3 |
Combustion Noise During Heating Operation |
using ordinary blowers, high noise and high power consumption |
using the world's top stepless frequency convertion blowers/fans, the noise is extremly low |
Construction and Installation |
complicated installation and large space required |
simple installation, requires little space |
Boiler Size(1MW Boiler) |
12m3 |
3m3 |
Boiler Weight |
large mas,heavy weight, inconventient installation, need lifting equipment, high requirements for load-bearing mechanisms, and poor safty |
the weight of cast aluminum silicon magnesium alloy is only 1/10 of that of carbon steel. Casters can be positioned and installed, very easy to transport and move |
Advanced Safty Control System:
Gas outage protection |
System water shortage protection |
Gas pressure protection |
Air pressure startup detection |
Gas flow air pulse compensation |
Post-purge protection |
Pre-purge protection |
Flue gas temperature protection |
Freeze protection |
Ion flameout protection |
Water temperature sensor failure protection |
System water overpressure protection |
Condensate seal blockage protection |
Anitioxidant corrosion protection |
Over temperature protection |
Ultra wide votage operation |
We use the wold famous brand components:
The core components is Condensing Full Pre-mixed Cast Silicon Aluminum Magnesium Alloy Heat Exchanger:
Typical Application:
Company Introduction:
Blue flame High-tech (Tianjin) Gas Technology Co., Ltd. is the first talent-intensive company in China that integrates optimization design, research and development, testing, and professional training of gas application products. There are high-end researchers in gas combustion, gas heating, gas air conditioning, gas transmission and distribution, efficient heat transfer, intelligent control, computational fluid dynamics simulation technology, computational combustion simulation technology, numerical heat transfer simulation technology, and other aspects. The company takes talents as the center, and actively promotes technology innovation in the gas application industry. The company aims to create the first international company focusing on the research and development, production, and sales of gas efficient and low emission utilization products in China.
Under the background of the state's promotion of industry-university-research innovation cooperation mode, blue flame High-tech (Tianjin) Gas Technology Co., LTD., relying on domestic scientific research institutes, has built an innovative platform for gas combustion and efficient utilization, gathered many domestic high-quality researchers in the gas application and related fields, and formed a professional research and development team. Internal personnel is graduated from Tianjin University, Tongji University, Chongqing University, Hebei university of technology, Beijing university of aeronautics and astronautics, and many other colleges, to provide high-end technical support for the company, relying on the blue flame high-tech innovation platform, gas boiler industry with low emission and high efficiency of silicon aluminum heat exchangers, and fully premixed low nitrogen condensing gas-fired boiler.
Patent Certificate:
Project Case:
FAQ:
Q1: How to get the best price quickly?
(1) Pls let us know the area used, the height of the floor, and the amount of hot water, we will give our proposal for the boiler model.
Q2: How long is the service life of the boiler?
A: Normally 25 years, with proper operation and good maintenance, the boiler can be used for 25-30 years.
Q3: How to guarantee the quality?
(1) We have a powerful QC team to control the quality in every production process. The best quality is our enterprise life;
(2) Third-party inspection report;
Q4: How about the installation and Commissioning?
After the boiler arrived at the site, we will guide you on how to install the boiler online; If necessary, we will fly to your site for installation and commissioning.